The maintenance of the press machine|FAQS|Heat Transfer Vinyl,Heat Transfer Film,Vinyl Shirt Printing-kent

LocationHome » News Center » FAQS » The maintenance of the press machine

The maintenance of the press machine


1, pressure: if the pressure is not enough or too large, can adjust the pressure screw rod (located at the bottom of the aluminum plate), the direction of the clock to increase the pressure, the counter clock to reduce the pressure.

2, Time: when the printing time of arrival and the buzzer sound or not stop to ring shall check the tail box micro switch contact point is moderate, if not applicable should be adjusted to the proper position.

3, temperature: warm for about 15 minutes, when the temperature reaches the set temperature, the heating indicator light lamp, can start the hot stamping; if the power of the heating plate is not hot, please check the line.

Recommend Other FAQS

【Keywords in the article】:Heat Transfer Vinyl Heat Transfer Film Vinyl Shirt Printing
【Editor】:KenteerCopyright:http://www.kenteer.comReproduced please indicate the source

Recommend product

  • Glitter heat transfer vinyl

    Glitter heat transfer vinly use high-end PET which through precision machine devided into same size materials,then made into vinyls.these high-tem...
  • Rainbow reflective heat transfer vinyl roll
    Reflective heat transfer cut vinyl use the retro-refraction principle of glasses high index of refraction,and the principle of Cubic Angle regression...
  • Pearl effect heat transfer vinyl
    Q1 series is a kind of elastic TPU graphic product of thermal flex vinyl,is a recommend product due to the market demand. Q1-3 is light type.
  • Flex PU heat transfer vinyl

    · Cutting vinyl is easy and convenient to use, don’t need pattern making, just need a graver or a scissor ,so it is also called DIY transfer fil...
  • A4 size anti-sublimation heat transfer vinyl sheets
    Q1 series is a kind of elastic TPU graphic product of vinyl iron on sheets ,is a recommend product due to the market demand.? Q1-4 is anti-sublimation...

Relevant FAQS

Latest News