Heat transfer vinyl FAQS|FAQS|Heat Transfer Vinyl,Heat Transfer Film,Vinyl Shirt Printing-kent

LocationHome » News Center » FAQS » Heat transfer vinyl FAQS

Heat transfer vinyl FAQS

1. It can't be transfer print and the film easy be off after washing?

key: because customer use hot pressing machine made in china(60*80 Voltage),add a warm-resistance layer,and customer often transfer print ready-to-wear clothes or polo shirts(collar,leg openings and waist band isn't in the same level line),the press machine clean one time after 30 days.

key:

1About equipment:the pressing machine should change its voltage into 8-10 kg because customer wants to transfer print ready-to-wear clothes.the platform of machine is too big ,the voltage isn't enough ,the temperature as well,and customer add a warm-resistance paper,it is far away from the requirement (temp 160 degrees,10 s)of  our machine.

So there are 4 reasons :not the same level line,the voltage isn't enough,the temp is too low,warm-resistance paper adding.

(2)About air pressure machine:user should get out the water in machine otherwise it is easy to get bad ,which will make all temps and voltage unstable.Especially in rainy day ,air compressor absorb much more water in the air. if you don't take any measure it will effect on fastness and wash.

(3)Silicon pad should use imported one,because it is soft enough,and the price is once higher than machine made in china,silicon made in Shanghai is cheap but too hard. Why user should use imported silicon? Because customer wanted to transfer print ready-to-wear clothes,if silicon pad too hard it not easy for clothes to stretch.

(4)Suggest customer use hydraulic pressure,it is suitable for transfer printing ready-to-wear clothes cause the voltage and temperature is enough. Our air pressure machine is good but not suit for customer's need.


2.The peeling layer isn't stable, too tight or too loose.

Key:There is something in our material, we will deal with it.


3.The film is off after washing several times and when customer receive the material and hot-press it again ,the picture is off?

Key: Because the glue isn't adhesive after hot pressing twice (the glue is dry).

Recommend product

  • Metallic heat transfer vinyl

    Metallic heat transfer sticker is also called electroplating heat transfer sticker,is a popular sticker recent years.It can be cut by manual but a...
  • Flock heat transfer vinyl

    Flock heat transfer sticker has strong stereo sense,fresh color,hand feeling soft,valuable sticker,environmentally friendly ,the fastness is good ...
  • Hologram heat transfer vinyl

    Laser materials are used to make all kinds of bag -decorations with laser holographic technology,laser materials connect with heat transfer printi...
  • Light color printable vinyl

    · Choose the photograph and adjust the color.
    · Coating and adjust the rules of sending paper.
    · Tips:up side down(the right side of ...
  • Rainbow reflective heat transfer vinyl roll
    Reflective heat transfer cut vinyl use the retro-refraction principle of glasses high index of refraction,and the principle of Cubic Angle regression...

Relevant FAQS

Latest News